Replaced motherboard, but own no video?

I merely replaced my dead motherboard beside an identical replacement, but I'm getting no video bad of the same card I be using before. I've tried the usual, unseat and reseat the card, and reseating the RAM, and adjectives that, but I'm getting nothing. It sounds approaching the computer is going through the whole boot process purely from the hard drive clicking, but bar that, nothing comes on blind.



It's an Intel D945Pvs motherboard, Intel Pentium D 840 3.2 GHz processor, 1 GB DDR2 533MHz RAM, 120 GB SATA HDD, and nVidia GeForce 6200 LE graphics card, connected through DVI.

Replaced motherboard, but own no video?

I would re-seat the video card if it's an AGP card, or reseat it in another slot if it's PCI.
checked the drivers? also check physical nouns ... cables and stuff and yes try to re-seat I don`t know its not plugged in tightly on the pci-e port..
Hi

Insert The Mother Board disc. And Installed the Dispaly Driver and The Audio Driver After that U get the Video and Audio..



If U Insatalled the Drivers u Check The Hardware is Correct or Not.similar to Connective Wire And Pins.